The Chester twin pallet horizontal machining centres deliver productivity and performance, the key to this is to reduce the non-machining time to enhance the cutting efficiencies. The range is divided into High Speed and High Performance CNC machines.

Please contact us for more info.


Technical Specifications H-1000L
Travel,X/Y/Z 2100/1235/1235mm
Spindle Center to Pallet Face 100-1335mm
Spindle Nose to Pallet Face 280-1515mm
Pallet Size 1000x1000mm
Maximum Workpiece φ2000mm
Maximum Pallet Load 3500kg
Maximum Workpiece Height 1500mm
Pallet Surface Configuration 80-M20 Tapped Holes Pitch 100mm
Pallet Indexing
Spindle Max.Speed 6000rpm
Low/Hight Gear Variation 1500rpm
Spindle Max.Torque(Standard) 660Nm
Spindle Taper 7/24 Taper No.50
Spindle Bearing ld 100mm
Spindle Transmission ZF gear box+belt transmission
Feed Rate
Max. X/Y/Z Rapid Speed 24000mm/min
Cutting Feed Rate 1-10000mm/min
Job Feed Rate 1260mm/min
Automatic Tool Change (ATC)
Type of Tool Shank ISO 50 or BBT-50
Tool Capacity 60 pc
Max.Tool Diameter(without Adjacent Tool) 125(250)mm
Max.Tool Length 600mm
Max.Tool Weight 30kg
ATC Changing Time(T to T) 8sec
Tool Selection Method Fixed Address
Automatic Pallet Changer (APC)
Number of Pallets 2
Pallet Changing Type Inclined shuttle-type
Time for APC 26
Controller System
Spindle Motor,Power 22/26kw(29.48/34.84hp)
Spindle Motor /
X/Y/Z/B Axis Motor 7/6/7/4kw(9.38/8.04/9.38/5.36hp)
Motor,Hydraulic System 3.7kw(4.96hp)
Motor,Coolant Pump System 1.6kw(2.14hp)
Power Supply
Power Requirement 42kva
Capacity of Oil/Coolant Tank
Capacity,Hydraulic System 60L
Capacity,Lubrication System 4L
Capacity,Coolant System 840L
Mechnical Specifications
Machine Dimensions 8110x5850x4013mm
Weight 32000kg



• Spindle Rpm 6000rpm

• Spindle Oil Cooling System

• Spindle Air Seal System

• Spindle Direct Transmission

• Spindle Direct Transmission+ZF Gear

• 3-Axis Roller Linear Rail

• 3-Axis Hollow Ballscrew Cooling System

• Pallet 1 ˚division

• Pallet M16 Fixing Holes

• Splash Ring

• Track Type Chip Conveyer System

• Chip Cart

• Indoor Chip Auger

• Mechanical Oil-coolant Separator

• Overhead Chip Wash-down System

• Dis-type Coolant Separator

• Front Door / Side Door Safety Switch

• Tool Storage Capacity 60T

• Tool Specification BBT

• Tool Specification NO.50

• M30 Automatic Power-off System

• Working Light

• Warm Light

• Electrical Cabin Heat Exchange System



• Spindle Rpm 8000rpm

• Spindle Rpm 10000rpm

• Spindle Direct Transmission

• 3-Axis Linear Scale System

• 4-Axis Encoder

• Pallet 0.001” Division

• Pallet T-slot

• Spindle Air Blow System

• Coolant Through Spindle

• CE Safety Specifications

• Safety Light Grid

• Tool Length Measuring System NC-4S

• Workpiece Measuring System RMP-60

• Tool Breakage Detection(Magazine)

• Tool Specification CAT

• Tool Specification NO.40

• Electrical Cabin Air-condition System

• Fanuc 31i

• Fanuc 0iMD

• Oil Mist Collector Unit

• Rotary Window

Click the links below to download the specific documents.
There are currently no videos attached to this product please check back in the future.