(+44) 01543 448940
Account
Cart
Description
| Technical Specifications H-630LB | |
| Travel | |
| Travel,X/Y/Z | 1000/850/950mm |
| Spindle Center to Pallet Face | 100-950mm |
| Spindle Nose to Pallet Face | 150-1100mm |
| Pallet | |
| Pallet Size | 630x630mm |
| Maximum Workpiece | φ1000mm |
| Maximum Pallet Load | 1000kg |
| Maximum Workpiece Height | 1000mm |
| Pallet Surface Configuration | 24-M16 Pitch 125 |
| Pallet Indexing | 1° |
| Spindle | |
| Spindle Max.Speed | 6000rpm |
| Low/Hight Gear Variation | N/A |
| Spindle Max.Torque(Standard) | 165Nm |
| Spindle Taper | 7/24 Taper No.50 |
| Spindle Bearing ld | 100mm |
| Spindle Transmission | Belt |
| Feed Rate | |
| Max. X/Y/Z Rapid Speed | 32000mm/min |
| Cutting Feed Rate | 1-10000mm/min |
| Job Feed Rate | 1260mm/min |
| Automatic Tool Change (ATC) | |
| Type of Tool Shank | ISO 50 or BBT-50 |
| Tool Capacity | 40 pc |
| Max.Tool Diameter(without Adjacent Tool) | 120(230)mm |
| Max.Tool Length | 450mm |
| Max.Tool Weight | 20kg |
| ATC Changing Time(T to T) | 5sec |
| Tool Selection Method | Fixed Address |
| Automatic Pallet Changer (APC) | |
| Number of Pallets | 2 |
| Pallet Changing Type | Rotary Type |
| Time for APC | 0iMF |
| Controller System | |
| FANUC | 18i |
| Motor | |
| Spindle Motor,Power | 22/26kw(29.48/34.84hp) |
| Spindle Motor | 165Nm |
| X/Y/Z/B Axis Motor | 7/7/4/1.6kw(9.38/9.38/5.36/2.14hp) |
| Motor,Hydraulic System | 2.2kw(2.95hp) |
| Motor,Coolant Pump System | 1.6kw(2.14hp) |
| Power Supply | |
| Power Requirement | 42kva |
| Capacity of Oil/Coolant Tank | |
| Capacity,Hydraulic System | 60L |
| Capacity,Lubrication System | 4L |
| Capacity,Coolant System | 840L |
| Mechnical Specifications | |
| Machine Dimensions | 5966x3570x3362mm |
| Weight | 23000kg |
STANDARD ACCESSORIES
• Spindle Rpm 6000rpm
• Spindle Oil Cooling System
• Spindle Air Seal System
• Spindle Direct Transmission
• 3-Axis Roller Linear Rail
• 3-Axis Hollow Ballscrew Cooling System
• Pallet 1 ˚division
• Pallet M16 Fixing Holes
• Splash Ring
• Track Type Chip Conveyer System
• Chip Cart
• Indoor Chip Auger
• Mechanical Oil-coolant Separator
• Overhead Chip Wash-down System
• Dis-type Coolant Separator
• Front Door / Side Door Safety Switch
• Tool Storage Capacity 40T
• Tool Specification BBT
• Tool Specification NO.50
• M30 Automatic Power-off System
• Working Light
• Warm Light
• Electrical Cabin Heat Exchange System
• Fanuc 0iMF
OPTIONAL ACCESSORIES
• 3-Axis Linear Scale System
• 4-Axis Encoder
• Pallet 0.001” Division
• Pallet T-slot
• Spindle Air Blow System
• Coolant Through Spindle
• CE Safety Specifications
• Tool Length Measuring System NC-4S
• Workpiece Measuring System RMP-60
• Tool Breakage Detection(Magazine)
• Tool Specification CAT
• Electrical Cabin Air-condition System
• Fanuc 31i
• Oil Mist Collector Unit
• Rotary Window
