CHESTER MB SERIES MAGNETIC BENDING MACHINES

The fundamental principle of the magnetic bending machine is that it uses an electromagnetic clamp rather than a mechanical clamping system. The machine consists of a long electromagnet with a steel clamp bar located above it. The sheet metal is clamped between the two by an electromagnet capable of clamping with a force range of between 3-10 tons. Rotating the bending beam then forms the bend as the sheet is bent around the front edge of the clamping bar. There are 4 different types of clamping bar used to form different folds.

Please contact us for more info.

Description

Model MB625 MB1000 MB1250
Max.Capacity 625×1.6mm 1000×1.6mm 1250×1.6mm
LengthxThickness 2’x16ga 3’x16ga 4’x16ga
Clamping Force 3Ton 4.5Ton 6Ton
Duty Cycle 30% 30% 30%
Back Gauge 390mm 640mm 640mm
Foot Switch Standard Standard Standard
Nominal Current 4Amp 6Amp 6Amp
Protection Thermal Cut-out 70º Thermal Cut-out 70º Thermal Cut-out 70º
Bending-edge Length 670mm 1050mm 1300mm
Distance between Lifters 630mm 1010mm 1260mm
Machine Size 780x850x935mm 1070x850x935mm 1320x680x935mm
Net Weight 102kg 142kg 175kg

 

Click the links below to download the specific documents.
There are currently no videos attached to this product please check back in the future.