Please contact us for prices and availability
FEATURES
Centroid M400 Control With 15” LCD. 3hp Spindle Motor, Nmtb30 Or Cat30 Spindle Taper. 4,000 RPM Spindle Speed with Hi-Lo Pully.Hardened & Ground With Turcite-B Coating Guide Way. C3 Double Nut Precision Ball Screws Hardened & Ground for High Accuracy. FC30 Meehanite Casting Main Frame Annealed & Stress Relieved for Long Term Reliability.100% Laser Tested For Positioning Accuracy & Repeatability. Box Ways Design on Y Axis to Provide Maximum Rigidity & Stability. Standard Way Cover on Three Axis Tool Box & Tools Coolant System Built-In Quartz Work Light.
Powerful control with user-friendly operation
• Cut parts the first day with CENTROID's straight-forward operation.
• Machine parts not possible with other controls.
• Get more work through a machine with faster setups.
• Produce parts with a better surface finish.
• Spend less time programming and more time making chips.
• Bring in more work and bid on higher paying jobs.
Useful Tools for quicker job turn around.
• Stop and restart the job at any point.
• Stop, make any adjustments, and restart right where you left off.
• Toolpath Graphics show you the cutter path before & while running the job.
• On-the-fly override control of feeds and speeds.
• Useful Help Screens guide you through Setup and Programming.
• Large Colour LCD display is easy to read.
• Run large part programs with no limitations.
• High Speed processing provides smooth machining, no gouging.
• Fast, smooth continuous tool motion.
Dedicated control panel for all common Milling functions
• Clearly labelled controls for each axis and direction.
• Dedicated buttons for spindle and coolant controls.
• Spindle speed override and Feedrate override.
• Tool Check, Feed Hold, Cycle Start, Rapid
override, Incremental and Continuous Jog, Single Block.
• Customize with Tool index +/-, Clamp/Unclamp, Vac on/off, & more.
• Extra auxiliary buttons are programmable for special applications.
• Fully sealed, coolant proof, long-lasting in shop environment.
• Tactile feedback, raised buttons with distinct action.
• Indicator lights show the selection made.
Conversational Programming is fast and easy
• Program parts right at the control or offline with your desktop PC.
• Convert geometry from DXF files to Centroid's Intercon operations. Supports contouring, pocketing, framing, drilling, boring, tapping, & threading.
• Help screens for all the common milling cycles, just fill in the dimensions. Even lines and arcs are canned cycles.
• A graph of the part shows your work as you go. Graph at any point.
• Automatic pocket cleanout, Intercon auto creates the roughing and finish passes automatically.
• Fill in the blank programming.
|
Table |
254 x 1270mm |
|
Longitudinal Travel |
800mm |
|
Cross Travel |
410mm |
|
Vertical Travel |
510mm |
|
Spindle Nose to TableTop |
80-590 mm |
|
Load Capacity |
455 Kg |
|
Spindle Taper |
NMTB30 or R8 |
|
Spindle Speed |
60 to 4000 rpm with HI-LO gear |
|
Transmission of Spindle & Motor |
Belts |
|
Spindle Centre to Column Surface |
430 mm |
|
Rapid Feed Rate |
X/Y/Z: 150 ipm DC |
|
Cutting Feed Rate |
1-120 ipm |
|
Spindle Motor/Max Torque |
2.25kw(3hp) |
|
Coolant Pump |
0.1kw(0.13hp) |
|
Lubrication Pump |
0.15kw(0.20hp) |
|
Power Requirement |
6.5 KVA, 3 Phase 208-230 voltage |
|
Dimensions (L x W x D) |
2950x1500x2400mm |
|
Net Weight |
2500 Kg |
STANDARD ACCESSORIES
• Tools & box
• Levelling Bolts & Plate
• Splash Guard
• Auto Lube System
• Coolant System
• Air Powered Drawbar
• Work Lamp
• RS-232 Interface
• 1 GB Solid State Hard Drive
• USB 2.0 Port
• Operation Manual
OPTIONAL ACCESSORIES
• Portable Hand Wheel
• Milling Chuck
• Clamping Kits
• Rotary Table
• Milling Vice
• 0 - Sensor