Please contact us for prices and availability
The Chester twin pallet horizontal machining centres deliver productivity and performance, the key to this is to reduce the non-machining time to enhance the cutting efficiencies
The range is divided into High Speed and High Performance CNC machines.
The High Speed machine has a 10,000 RPM spindle with fast acceleration/deceleration along with the fast changing twin pallets with a standard 60 tool automatic tool changer. The High Performance machines have a BT50 spindle taper with 6000 RPM, this also has the fast changing twin pallets with a 40 automatic tool changer.
|
Technical Specifications |
|
|
Travel |
|
|
Travel,X/Y/Z |
700/650/650m |
|
Spindle Center to Pallet Face |
50-70mm |
|
Spindle Nose to Pallet Face |
150-800mm |
|
Pallet |
|
|
Pallet Size |
500x500mm |
|
Maximum Workpiece |
φ700mm |
|
Maximum Pallet Load |
500kg |
|
Maximum Workpiece Height |
800mm |
|
Pallet Surface Configuration |
24-M16 Pitch 100 |
|
Pallet Indexing |
1° |
|
Spindle |
|
|
Spindle Max.Speed |
10000rpm |
|
Low/Hight Gear Variation |
6000rpm |
|
Spindle Max.Torque(Standard) |
120N-m |
|
Spindle Taper |
7/24 Taper No.40 |
|
Spindle Bearing ld |
70mm |
|
Spindle Transmission |
Direct Couple |
|
Feed Rate |
|
|
Max. X/Y/Z Rapid Speed |
36000mm/min |
|
Cutting Feed Rate |
1-10000mm/min |
|
Job Feed Rate |
1260mm/min |
|
Automatic Tool Change (ATC) |
|
|
Type of Tool Shank |
ISO40 or BBT-40 |
|
Tool Capacity |
60 pc |
|
Max.Tool Diameter(without Adjacent Tool) |
80mm(160mm) |
|
Max.Tool Length |
380mm |
|
Max.Tool Weight |
8kg |
|
ATC Changing Time(T to T) |
5sec |
|
Tool Selection Method |
Fixed Address |
|
Automatic Pallet Changer (APC) |
|
|
Number of Pallets |
2 |
|
Pallet Changing Type |
Rotary Type |
|
Time for APC |
0iMF |
|
Controller System |
|
|
FANUC |
18i |
|
Motor |
|
|
Spindle Motor,Power |
15/18.5kw(20.1/24.79hp) |
|
Spindle Motor |
120Nm |
|
X/Y/Z/B Axis Motor |
7/7/4/1.6kw(9.38/9.38/5.36/2.14hp) |
|
Motor,Hydraulic System |
2.2kw(2.95hp) |
|
Motor,Coolant Pump System |
1.6kw(2.14hp) |
|
Power Supply |
|
|
Power Requirement |
42kva |
|
Capacity of Oil/Coolant Tank |
|
|
Capacity,Hydraulic System |
60L |
|
Capacity,Lubrication System |
4L |
|
Capacity,Coolant System |
760L |
|
MSpecifications |
|
|
Machine Dimensions |
5000x3200x2980mm |
|
Weight |
15000kg |
Standard Accessories:
√ Spindle Rpm 10000rpm
√ Spindle Oil Cooling System
√ Spindle Air Seal System
√ Spindle Direct Transmission
√ 3-Axis Roller Linear Rail
√ 3-Axis Hollow Ballscrew Cooling System
√ Pallet 1 ˚division
√ Pallet M16 Fixing Holes
√ Splash Ring
√ Track Type Chip Conveyer System
√ Chip Cart
√ Indoor Chip Auger
√ Mechanical Oil-coolant Separator
√ Overhead Chip Wash-down System
√ Dis-type Coolant Separator
√ Front Door / Side Door Safety Switch
√ Tool Storage Capacity 60T
√ Tool Specification BBT
√ Tool Specification NO.40
√ M30 Automatic Power-off System
√ Working Light
√ Warm Light
√ Electrical Cabin Heat Exchange System
√ Fanuc 0iMD
Optional Accessories:
• 3-Axis Linear Scale System
• 4-Axis Encoder
• Pallet 0.001” Division
• Pallet T-slot
• Spindle Air Blow System
• Coolant Through Spindle
• CE Safety Specifications
• Tool Length Measuring System NC-4S
• Workpiece Measuring System RMP-60
• Tool Breakage Detection(Magazine)
• Tool Specification CAT
• Electrical Cabin Air-condition System
• Fanuc 31i
• Oil Mist Collector Unit
• Rotary Window
View H Series Brochure