Please contact us for prices and availability
The Chester twin pallet horizontal machining centres deliver productivity and performance, the key to this is to reduce the non-machining time to enhance the cutting efficiencies
The range is divided into High Speed and High Performance CNC machines.
The High Speed machine has a 6,000 RPM spindle with fast acceleration/deceleration along with the fast changing twin pallets with a standard 60 tool automatic tool changer. The High Performance machines have a BT50 spindle taper with 6000 RPM, this also has the fast changing twin pallets with a 40 automatic tool changer.
|
Technical Specifications |
|
|
Travel |
|
|
Travel,X/Y/Z |
1300/1200/1200mm |
|
Spindle Center to Pallet Face |
100-1300mm |
|
Spindle Nose to Pallet Face |
200-1400mm |
|
Pallet |
|
|
Pallet Size |
800x800mm |
|
Maximum Workpiece |
φ1300mm |
|
Maximum Pallet Load |
2000kg |
|
Maximum Workpiece Height |
1300mm |
|
Pallet Surface Configuration |
24-M16 Pitch 160 |
|
Pallet Indexing |
1° |
|
Spindle |
|
|
Spindle Max.Speed |
6000rpm |
|
Low/Hight Gear Variation |
1500rpm |
|
Spindle Max.Torque(Standard) |
660Nm |
|
Spindle Taper |
7/24 Taper No.50 |
|
Spindle Bearing ld |
100mm |
|
Spindle Transmission |
Belt+ZF |
|
Feed Rate |
|
|
Max. X/Y/Z Rapid Speed |
32000mm/min |
|
Cutting Feed Rate |
1-10000mm/min |
|
Job Feed Rate |
1260mm/min |
|
Automatic Tool Change (ATC) |
|
|
Type of Tool Shank |
ISO 50 or BBT-50 |
|
Tool Capacity |
60 pc |
|
Max.Tool Diameter(without Adjacent Tool) |
125(250)mm |
|
Max.Tool Length |
600mm |
|
Max.Tool Weight |
30kg |
|
ATC Changing Time(T to T) |
8sec |
|
Tool Selection Method |
Fixed Address |
|
Automatic Pallet Changer (APC) |
|
|
Number of Pallets |
2 |
|
Pallet Changing Type |
Rotary Type |
|
Time for APC |
0iMF |
|
Controller System |
|
|
FANUC |
18i |
|
Motor |
|
|
Spindle Motor,Power |
22/26kw(29.48/34.84hp) |
|
Spindle Motor |
165Nm |
|
X/Y/Z/B Axis Motor |
7/6/7/3kw(9.38/8.04/9.38/4.02hp) |
|
Motor,Hydraulic System |
3.7kw(4.96hp) |
|
Motor,Coolant Pump System |
1.6kw(2.14hp) |
|
Power Supply |
|
|
Power Requirement |
42kva |
|
Capacity of Oil/Coolant Tank |
|
|
Capacity,Hydraulic System |
60L |
|
Capacity,Lubrication System |
4L |
|
Capacity,Coolant System |
850L |
|
Mechnical Specifications |
|
|
Machine Dimensions |
6991x4326x3948mm |
|
Weight |
25000kg |
Standard Accessories:
√ Spindle Rpm 6000rpm
√ Spindle Oil Cooling System
√ Spindle Air Seal System
√ Spindle Direct Transmission
√ Spindle Direct Transmission+ZF Gear
√ 3-Axis Roller Linear Rail
√ 3-Axis Hollow Ballscrew Cooling System
√ Pallet 1 ˚division
√ Pallet M16 Fixing Holes
√ Splash Ring
√ Track Type Chip Conveyer System
√ Chip Cart
√ Indoor Chip Auger
√ Mechanical Oil-coolant Separator
√ Overhead Chip Wash-down System
√ Dis-type Coolant Separator
√ Front Door / Side Door Safety Switch
√ Tool Storage Capacity 60T
√ Tool Specification BBT
√ Tool Specification NO.50
√ M30 Automatic Power-off System
√ Working Light
√ Warm Light
√ Electrical Cabin Heat Exchange System
√ Fanuc 0iMF
Optional Accessories:
• 3-Axis Linear Scale System
• 4-Axis Encoder
• Pallet 0.001” Division
• Pallet T-slot
• Spindle Air Blow System
• Coolant Through Spindle
• CE Safety Specifications
• Tool Length Measuring System NC-4S
• Workpiece Measuring System RMP-60
• Tool Breakage Detection(Magazine)
• Tool Specification CAT
• Electrical Cabin Air-condition System
• Fanuc 31i
• Oil Mist Collector Unit
• Rotary Window
View H Series Brochure