VTL-CM / CC SERIES Vertical Boring Machines

Please call for a quote


Model / Descriptions VTL-1600CM/VLT1600CC VTL-1600CM/VLT2000CC
 
 
Capacity
Max. Swing Diameter 1600mm 2000mm
Max. Turning Diameter 1600mm 2000mm
Distance From Bite Holder End To 0-1205mm (0-155mm for CC) 0-605mm (0-1555mm for CC)
Max. Turning Height 1200mm (1150mm for CC) 1600mm (1550mm for CC)
Max. Work piece Weight 8000kg 10000kg
 
 
Table
Table Diameter (Manual Chuck) 1250mm 1600mm
Range Of Table Speed(Low) 34-103rpm 22-85rpm
Range Of Table Speed(High) 104-312rpm 65-255rpm
Gear Speed 2 steps 2 steps
Max Of Table Torque 12400n.m 24000n.m
 
 
ATC
ATC (Automatic Tool Change) 1set (12pocket) 1set (12pocket)
Tool Type T- Puller (BT-50 for CC) T- Puller (BT-50 for CC)
Number Of Position 12 12
Tool Size 25 ,32 ,40mm 25 ,32 ,40mm
Cross-Section Of Ram 200×200mm (240x240mm for CC) 240×240mm
 
 
 
 
Feed
Rapid Rate (X-Axis) 10m/min 10m/min
Rapid Rate (Z-Axis) 10m/min 10m/min
Horizontal Travel ( X-Axis) -820 +1000mm(Ref. point) -1020 +1220mm(Ref. point)
Vertical Travel ( Z-Axis) 900mm (1000mm for CC) 1000mm
Cross-Rail Travel 500mm ( 2 steps 3 position) 750mm(3steps4 position)
Cutting Feed Rate 0.001-50mm/rev 0.001-50mm/rev
Feed Override 0-150% 0-150%
CNC Controller System FANUC 0i-TD FANUC 0i-TD
 
 
 
Motors
Table Main Motor(Con/30 Min.) α40i(37kw/45kw) α50i(45kw/55kw)
Feed Servo Motor(X/Z Axis) α30i(7kw/7kw) α30i(7kw/7kw)
Milling Motor For Cc Model Only αP30i(15kw/18.5kw) αP40i(18.5kw/22kw)
Machine Size Floor space ( L × W ) 7200×5000mm
Max. Height ( H ) 5450mm 6325mm
Net. Weight 23500kg 33750kg




 
Model / Descriptions VTL-2500CM/VLT2500CC VTL-3000CM/VLT3000CC
 
 
Capacity
Max. Swing Diameter 2500mm 3000mm
Max. Turning Diameter 2500mm 3000mm
Distance From Bite Holder End To 0-1850mm (0-1800mm for CC) 0-2230mm (0-2180 for CC)
Max. Turning Height 1800mm (1750mm for CC) 2180mm (2130mm for CC)
Max. Work piece Weight 15000kg 20000kg
 
 
Table
Table Diameter (Manual Chuck) 2000mm 2500mm
Range Of Table Speed(Low) 13-50rpm 8-30rpm
Range Of Table Speed(High) 51-200rpm 31-120rpm
Gear Speed 2 steps 2 steps
Max Of Table Torque 55800n.m 89400n.m
 
 
ATC
ATC (Automatic Tool Change) 1set (12pocket) 1set (12pocket)
Tool Type T- Puller (BT-50 for CC) T- Puller (BT-50 for CC)
Number Of Position 12 12
Tool Size 25,32,40mm 25 ,32 ,40mm
Cross-Section Of Ram 254×254mm 300×300mm
 
 
 
 
Feed
Rapid Rate (X-Axis) 10m/min 10m/min
Rapid Rate (Z-Axis) 10m/min 10m/min
Horizontal Travel ( X-Axis) -1300 +1510mm(Ref. point) -1520 +1720mm(Ref. point)
Vertical Travel ( Z-Axis) 1250mm 1200mm
Cross-Rail Travel 1120mm(4 steps5 position) 1400mm (5 steps6 position)
Cutting Feed Rate 0.001-50mm/rev 0.001-50mm/rev
Feed Override 0-150% 0-150%
CNC Controller System FANUC 0i-TD FANUC 0i-TD
 
 
 
Motors
Table Main Motor(Con/30 Min.) α60Hvi(60kw/75kw) α60Hvi(60kw/75kw)
Feed Servo Motor(X/Z Axis) α30i(7kw/7kw) α30i(7kw/7kw)
Milling Motor For Cc Model Only αP50i(22kw/30kw) αP50i(22kw/30kw)
Machine Size 8000×5430mm 8650×5500mm
Max. Height ( H ) 6800mm 7750mm
Net. Weight 45000kg 55000kg


STANDARD ACCESSORIES
• Fanuc OiTD with 8.4” Colour LCD
• Full Enclosure
• Hydraulic Unit
• Four Jaw Independent Manual Chuck
• Automatic Lubrication System
• Work Light
• Work Piece Counter (Fanuc)
• Coolant through Tool Holder
• Heat Exchanger for Electrical Cabinet
• Gear/Bearing Lubrication and Oil Cooler Control
• Service Tool Box and Tool Kits
• Chip Conveyor and Trolley
• Moveable Vertical Cross Rail
• Coolant System with Tank (4 bar)


OPTIONAL ACCESSORIES
• Air Conditioner for Electrical Cabinet
• Transformer
• Oil Skimmer
• Special Size Tool Holder
• Tool Measuring Device
• Linear Scale for X & Z Axis (Closed Loop
Control System
• High Pressure Coolant Pump
• Auto Door
• Coolant Level Read Out
• Flushing Chip System
• Fanuc 32iTA Controller

 

View our Boring Machines Brochure here